Phoenix Tibial Nail System

The Phoenix Tibial Nail System features CoreLock Technology that offers a preassembled, locking mechanism for locking all proximal oblique screws and for inboard compression up to 5mm. Distally, the tibial nail optimizes fixation with a low distal hole 4.5mm from the center of the most distal screw to the nail tip.

Selling Points:

  • CoreLock Technology enables up to 5mm of inboard compression and locking of both proximal oblique screws
  • Low distal screw cluster of 15.6mm with most distal hole at 4.5mm from the nail tip enables fixation of very distal tibial fracture
  • Nail lengths are offered in increments of 10mm to better fit with patient requirements
  • 7.5mm nail size may be used to treat patients with very narrow medullary canals
  • 3 degree distal bend facilitates easier nail insertion

Legal Manufacturer:                      

Biomet Orthopedics
56 East Bell Drive
P.O. Box 587
Warsaw, Indiana 46581 USA


All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to Zimmer Biomet or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of Zimmer Biomet.  
This material is intended for health care professionals. Distribution to any other recipient is prohibited.
For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see the package insert and information on this website. To obtain a copy of the current Instructions for Use (IFU) for full prescribing and risk information, please call 1-800-348-2759, press 4 for 411 Technical Support.