Repicci II Resurfacing Knee System

  • Minimally Invasive Surgical Technique. Requires 3 to 4 inch incision, does not evert the patella
  • Resurface components - 4 to 5 mm on tibia, 2 to 3 mm on femur; convert to total knee
  • John A. Repicci was inventor of this technique - has been performing technique since 1993.
  • Direct compression molded bearings, 6.5mm
  • Cadaver training labs available for hands-on instruction

All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to Zimmer Biomet or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of Zimmer Biomet.  
This material is intended for health care professionals. Distribution to any other recipient is prohibited.
For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see the package insert and information on this website. To obtain a copy of the current Instructions for Use (IFU) for full prescribing and risk information, please call 1-800-348-2759, press 4 for 411 Technical Support.