ExploR® Modular Radial Head System

A modular, easy-to-assemble alternative to one-piece head/stem designs

1000x1000_insetimage_Extremities_ExploR

The ExploR® Modular Radial Head offers an efficient, practical solution for treating degenerative or post-traumatic conditions of the proximal radial head/neck. Its modular design means that the head and stem can be selected independently, allowing the head to closely match the diameter of the articulating surface of the native radial head while ensuring optimal stem fixation. After the stem is implanted, the head is loaded from the side, making it easier to assemble the implant in a tight joint. A setscrew secures the head to the stem. The system can be used for primary and revision joint arthroplasty with cemented or uncemented press-fit applications.

  • Modular design allows the head to be replaced without removing the implanted stem
  • Insertion technique allows for preservation of the radial collateral ligament
  • Reproduces natural articulation of radio-capitellar and radio-ulnar joints
  • Three head diameters, each with five different lengths, for a total of 15 head options
  • Five different stem options provide for optimal patient sizing
  • Fully interchangeable parts allow for 75 different combinations

 

Legal Manufacturer:                      

Biomet Orthopedics
56 East Bell Drive
P.O. Box 587
Warsaw, Indiana 46581 USA


All content herein is protected by copyright, trademarks and other intellectual property rights, as applicable, owned by or licensed to Zimmer Biomet or its affiliates unless otherwise indicated, and must not be redistributed, duplicated or disclosed, in whole or in part, without the express written consent of Zimmer Biomet.  
This material is intended for health care professionals. Distribution to any other recipient is prohibited.
For product information, including indications, contraindications, warnings, precautions, potential adverse effects and patient counseling information, see the package insert and information on this website. To obtain a copy of the current Instructions for Use (IFU) for full prescribing and risk information, please call 1-800-348-2759, press 4 for 411 Technical Support.